General Care
Xerox
® WorkCentre® 3025
User Guide
171
General Care
Redistributing Toner
When the print cartridge is near the end of its life:
• White streaks on prints or light printing occurs.
• The low toner indicator appears on the UI if the Low Toner Alert feature was enabled.
If either condition occurs, you can temporarily improve print quality by redistributing the remaining
toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have
redistributed the toner.
Follow these steps to redistribute the toner in your print cartridge and temporarily improve print
quality.
1. Lift the top cover of the machine from under the control
panel.
2. Reach in where the arrow indicates ‘open’ on the right
and pull up to release the inside cover. Then lift the
panel in the center of the machine to reveal the print
cartridge.
To Next Page
Loading...
Need help?
General