Xerox WorkCentre 3025BI User Manual

Powering On the Machine
Xerox® WorkCentre® 3025
User Guide
16
Machine Status Menu
The Machine Status button provides information about the machine and access to the machine
setups. After your machine is installed, it is recommended that you change the settings for various
feature options within the print environment to meet your preferences and needs. A password may be
required to access and change these settings.
The following table shows the available options for each menu item.
Note: Some menu options may be unavailable depending on your machine configuration and
whether the machine is in the Ready state.
Information
Pages
Feature
Defaults
Fax Setup System Setup
• Configuration
•Demo Page
•Network
Configuration
•Supplies
Information
•Usage Counter
•Fax Received
•Fax Sent
• Scheduled Jobs
•Fax
Confirmation
•Junk Fax
•Copy Defaults
•Fax Defaults
•Enable/Disable
• Sending
• Receiving
•Manual TX/RX
•Machine Setup
•Paper Setup
• Sound/Volume
•Maintenance

Xerox WorkCentre 3025BI Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Memory	128 MB
Duplex Printing	Manual
First Page Out	As fast as 8.5 seconds
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Paper Capacity	150 sheets
Processor Speed	600 MHz
Dimensions	406 x 360 x 257 mm
Weight	7.5 kg
Scan Resolution	600 x 600 dpi
Maximum Document Size	216 x 356 mm
Connectivity	USB, Wi-Fi
Print Resolution	Up to 1200 x 1200 dpi enhanced image quality
Duty Cycle	Up to 15, 000 pages