Xerox WorkCentre 3025BI User Manual

Copy Options
Xerox® WorkCentre® 3025
User Guide
98
Collation Places printed pages in
order.
• On: Defines the page sequence for printing.
• Off: Select if collation is not required.
Layout This option is used to copy
multiple documents onto
one sheet of paper, copy
from book originals, create
booklet output, and
produce documents which
can be pasted together to
make a poster.
• Normal: Select this option to match the layout of the
originals.
• 2 Up: This feature is used to copy two documents, in a
reduced size, onto one sheet of paper.
• 4 Up: This feature is used to copy four documents, in a
reduced size, onto one sheet of paper.
• ID Card Copy: The machine prints one side of the
original on the upper half of the paper and the other
side on the lower half without reducing the size of the
original.
Refer to Using the Layout Options for instructions.
Adjust Bkgd. Use to print an image
without its background.
This feature reduces or
eliminates the dark
background resulting from
scanning colored paper or
newspaper originals.
• Off: Select if Background Adjustment is not required.
• Auto: Select to optimize the background.
• Enhance Lev 1 - 2: Select a higher number for a more
vivid background.
• Erase Lev. 1-4: Select a higher number for a lighter
background.
Feature Description Options

Xerox WorkCentre 3025BI Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Memory	128 MB
Duplex Printing	Manual
First Page Out	As fast as 8.5 seconds
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Paper Capacity	150 sheets
Processor Speed	600 MHz
Dimensions	406 x 360 x 257 mm
Weight	7.5 kg
Scan Resolution	600 x 600 dpi
Maximum Document Size	216 x 356 mm
Connectivity	USB, Wi-Fi
Print Resolution	Up to 1200 x 1200 dpi enhanced image quality
Duty Cycle	Up to 15, 000 pages