Xerox WorkCentre M15 - Page 60

Page 4-8 Xerox WorkCentre M15/M15i User Guide
Copy
Clone Use to print multiple images
on a single sheet of paper.
The number of images
produced is determined
automatically based on the
original image size.
l Only available using the
Document Glass, ensure the
ADF is empty.
Ø
Press [Reduce/Enlarge] repeatedly until ’CLONE’
displays.
Ø Press [Enter] to save the selection.
Ø Place the original on the Document Glass, lower
the cover and press [Start].
The machine pre-scans the original to determine
the number of images to be printed on a page.
The machine completes the job.
Collated
l Use to produce
collated copy
sets.
ON/OFF Use to produce collated
output e.g. 2 copies of a 3
page job will print one
complete document,
followed by the second
completed document.
Ø Press [Collated] to display the current setting.
Ø Press [Collated] to select ’ON’.
Ø Press [Enter] to save the selection.
1 - 2 - Sided
Copy
l Use to produce 2
sided copy
output.
OFF Use to switch off 2-Sided
copying.
Ø Press [1 - 2 - Sided Copy] repeatedly until the
required setting displays.
Ø Press [Enter] to save the selection.
Ø Scan 1 - 2 Sided originals using the ADF or the
Document Glass.
Ø To scan 2 - 2 Sided originals use the Document
Glass. Scan side 1 and when prompted, turn over
the original and select [YES] to scan side 2.
Repeat the procedure until all originals have been
scanned. Then use the key to select [NO]
and press [Enter].
Long
Edge
Produces copies with the
binding orientation along
the long edge of the paper.
Short
Edge
Produces copies with the
binding orientation along
the short edge of the paper.