Xirrus Wi-Fi Array XR4420 User Manual

Wi-Fi Array
Introduction 25
Interfaces Serial Console Port:
1 x RS232 – RJ45 connector, for local
configuration
Ethernet Interfaces:
2 x Gigabit 100/1000 Mbps uplink ports for link
aggregation, redundancy, or bridging
1 x Fast Ethernet 10/100 Mbps, for out of band
management
Status LEDs:
System status, Ethernet, Radio
Networking DHCP client, DHCP server (multiple DHCP
pools), DNS Client, NTP client, NAT
Management Xirrus Management System (XMS) — Layer 3
Element Management System
HTTPS Web Management Interface (WMI)
CLI via SSHv2, Telnet, local serial Console
Enable/disable management for any interface
Read-write and read-only admin accounts may
be authenticated via RADIUS
SNMP v2c, v3
Configuration Files — text-based files may be
imported, exported, or compared
NetFlow — IP flow information (traffic statistics
may be sent to an external Collector
FTP, TFTP
Syslog reporting for alerts/alarms — messages
may be stored on internal Syslog server or sent to
up to three external syslog servers.
Cisco Discovery Protocol (CDP) — obtain
protocol addresses and platform information for
neighboring devices
Element XR4000 Series Specifications

Xirrus Wi-Fi Array XR4420 Specifications

General

Brand	Xirrus
Model	Wi-Fi Array XR4420
Category	Speaker System
Language	English