Wi-Fi Array
46 Introduction
Electrical XS16/XS8:
Each Array supports both AC and PoGE
AC Input Power: 90-265VAC at 47-63Hz
PoGE Input Power: Power over Gigabit Ethernet —
no splitter required, 48VDC
Nominal Power:
XS16: 70W
XS8: 45W
For PoGE, see “Power over Gigabit Ethernet
Compatibility Matrix” on page 451.
Networking DHCP client, DHCP server, NTP client, NAT
VLAN Support 802.1Q, 802.1p VLAN
Supports up to 16 VLANs
Multiple SSID
Support
Allows up to 16 separate SSIDs to be defined with
map security, VLAN and QoS settings for each
SSID
Performance Client Load Balancing
Automatic load balancing between system radios
Quality of Service:
802.1p wired traffic prioritization
Wireless packet prioritization
MAP CoS to TCID
Fair queuing of downstream traffic
Element XS16/XS8 Specifications
To Next Page
Need help?
General
