Doc. 20780_03 49
DPRO Passive-Infrared (PIR) PRO Series by Xtralis Planning and Commissioning Manual
If you are using a Windows 7 platform, follow these steps to configure the port:
1. Connect the “IFM-485-ST” to the available port,
2. Right click “My Computer”,
3. Click “Manage”,
4. Click “Device Manager”,
5. Click “Ports (COM and LPT)”, a list of available ports appears as shown next:
6. Right click “USB Serial Port (COM3)” to update its driver software,
7. Click (Update Driver Software…), the following window appears:
8. Select “Search automatically for updated driver software”, the following window
appears:
9. Wait for the search to complete, the following window appears:
To Next Page
Loading...
