56 Doc. 20780_03
Planning and Commissioning Manual ADPRO Passive-Infrared (PIR) PRO Series by Xtralis
The following sections discuss, in detail, the actions you can perform.
10.3.4.1 Search Detector
To search for a detector, refer to section (10.3.1 Select Detector).
10.3.4.2 Up/Download
The Software simplifies the process of detectors configuration and allows you to save time
spent in setting other detectors values. You can configure a detector and use the same
settings for other detectors of the same type connected to the Software.
You can manage setting options, upload a detector’s settings, download them from a
definition file, and save them to a new definition file, etc.
The Up/Download window appears as follows:
Settings window is detector-model-dependent and is primarily designed to review and
change detector’s parameters. These include the overall sensitivity, mounting height, etc.
The window shows the detailed setting options of the selected detector. It also shows the
actions you can perform where each one is represented with a certain button as follows:
Image Action
Upload settings to detector
Download detector’s settings
Copy
Insert
Save to configuration file
Load from configuration file
To Next Page
Loading...
Need help?
General
