Xtralis VESDA-E VEP-A10-P User Manual

VESDA-EVEP-A10-P Product Guide
www.xtralis.com 75
Parameter Default Values Range Affected by Return to
Factory Defaults
command
Minimum Maximum
GPI Function
(Monitored)
Mains OK n/a n/a Yes
Relays
Assignment of Relays
to conditions
See Table4-2 n/a n/a Yes
Normally Energized See Table4-2 n/a n/a Yes
Latching Checked Unchecked Checked Yes
Button Lockout
Lockout
l Reset Unchecked Unchecked Checked Yes
l Disable Unchecked Unchecked Checked Yes
AutoLearn Smoke and Flow Commands
Duration 14 days 15 minutes 16 days n/a
Table5-4: Default Settings (continued...)
1
The Xtralis VSC software forces the user to move the detector to a valid zone number.
2
The user must set the password the first time. There is no default password.
3
Default value set in factory. Not modified by return to factory defaults command.
4
The WiFi Security Key type depends on the WiFi security method in use.

Xtralis VESDA-E VEP-A10-P Specifications

General

Brand	Xtralis
Model	VESDA-E VEP-A10-P
Category	Smoke Alarm
Language	English