Yamaha RTX810 - Page 153

153
Troubleshooting
8
Symptom ▶ Cause ▶ Remedy
Although the
firmware has been
copied manually by
entering a command,
the setting is not
reflected.
Only copying the firmware
manually by entering a command,
the setting is not reflected in the
actual operation.
Manually copy the firmware, and then restart
the product.
Although the
setting file has been
copied manually by
entering a command,
the setting is not
reflected.
Only copying the setting file
manually by entering a command,
the setting is not reflected in the
actual operation.
Manually copy the setting file, and then
restart the product.