Yamaha RTX810 - If You Have Forgotten the Password

161
Troubleshooting
8
If you have forgotten the text strings specied as login
password or administration password, you cannot login to
the product. Even in this case, by entering the following
emergency password from the serial terminal connected to
the console port, you can login to the product.
Emergency password
“w,lXlma”
Tip
Please refer to page 121 for details on the connection to the console
port and setting of the PC.
If you login to the product by using the emergency
password, you will login with the administrator mode. Then
set again the login password and administration password
that you have forgotten. You can also use this emergency
password for the old password that is requested when setting
a password.
Note
You can disable this function by setting the security class
command. You cannot login using this procedure if the second
parameter is not set to “ON” in the security class command.
In this case, initialize the procedure according to “Initializing
through button operation of the product” (page 160). Please refer
to “Command reference” (included in the attached CD-ROM)
for more details on the security class command.
If you have forgotten the password