Ensure the following are available before
beginning preparations
LAN cables
Provide LAN cables based on the number of PCs and distance.
HUB
Up to four PCs can be directly connected to the LAN ports of the product. If you desire to connect
ve or more PCs, use a hub (a switch hub) that supports 10BASE-T, 100BASE-TX, or 1000BASE-T.
Information regarding the network to which the product is
attached
Predetermine the IP address to be assigned to the LAN side of the product.
Note
To connect the product to a network that uses a DHCP server, you need to disable the DHCP server function
of the product. For details, contact your network administrator.
Cautions when installing the product
Please carefully read and observe the “Safety precautions” on page 5 when installing the product.
17
Making preparations
Making preparations
2
To Next Page
Loading...
