Yamaha SRX700D - For Engine Service; For Power Train Service

1-5
GEN
INFO
SPECIAL TOOLS
SDN1190
SDN1200
SDN1210
SDN1220
SDN1230
SDN1240
SDN1250
SDN1260
FOR ENGINE SERVICE
• Piston pin puller
P/N: YU-01304 (for U.S.A./Canada)
90890-01304 (for Europe)
This tool is used to remove the piston pin.
• Rotor holding puller
P/N: YU-33270 (for U.S.A./Canada)
90890-01362 (for Europe)
This tool is used to remove the magneto rotor.
• Cooling system tester
P/N: YU-24460-01 (for U.S.A./Canada)
90890-01325 (for Europe)
This tester is used for checking the cooling system.
FOR POWER TRAIN SERVICE
• Primary sheave holder
P/N: YS-01880 (for U.S.A./Canada)
90890-01701 (for Europe)
This tool is used to hold the primary sheave.
• Primary sheave puller (18 mm)
P/N: YS-39962
This tool is used for removing the primary sheave.
• Clutch spider separator
P/N: YS-28890-B (for U.S.A./Canada)
90890-01711 (for Europe)
This tool is used when disassembling and assembling the primary
sheave.
• Clutch separator adapter
P/N: YS-34480 (for U.S.A./Canada)
90890-01740 (for Europe)
This tool is used when disassembling and assembling the primary
sheave.
• YXR clutch bushing jig kit
P/N: YS-39752
This tool is used for removal and installation of primary clutch weight
and roller bushings.