Yamaha SRX700D - Chain Slack Adjustment

2-28
INSP
ADJ
T
R
.
.
SDN2570
• Install the oil drain bolt.
Oil drain bolt:
16 Nm (1.6 m • kg, 11 ft • lb)
Recommended oil:
Gear oil API “GL-3” SAE #75 or #80
Oil capacity:
0.25 L (8.8 Imp oz, 8.5 US oz)
Chain slack adjustment
1. Remove:
• Exhaust silencer
Refer to “EXHAUST ASSEMBLY” in CHAP-
TER 5.
2. Adjust:
• Drive chain slack
Adjustment steps:
• Loosen the locknut 1.
• Turn the adjusting bolt 2 in until it is finger
tight.
• Tighten the locknut.
3. Install:
• Exhaust silencer
Refer to “EXHAUST ASSEMBLY” in CHAP-
TER 5.
DRIVE CHAIN