Yamaha SRX700D - For Carburetion Service; For Electrical Service

1-6
GEN
INFO
SPECIAL TOOLS
SDN1270
SDN1280
SDN1300
SDN1310
SDN1320
SDN1330
• Clutch bushing press
P/N: YS-42424
This tool is used for removing and installing the post bushings (primary
sheave cap bush, sliding sheave bush and torque cam bush).
• Track clip installer
P/N: YS-91045-A (for U.S.A./Canada)
90890-01721 (for Europe)
This tool is used for installing the track clip.
• Angle finder
P/N: YS-42422
This tool is used for checking and adjusting the ski spindle camber.
FOR CARBURETION SERVICE
• Mity vac
P/N: YB-35956 (for U.S.A./Canada)
90890-06756 (for Europe)
This tool is used to check the fuel pump.
FOR ELECTRICAL SERVICE
• Pocket tester
P/N: YU-03112 (for U.S.A./Canada)
90890-03112 (for Europe)
This instrument is necessary for checking the electrical components.
• Electro tester
P/N: YU-33260-A (for U.S.A./Canada)
90890-03021 (for Europe)
This instrument is invaluable for checking the electrical system.
• Yamaha power valve system (Y.P.V.S.) adjustment coupler
P/N: YS-43092
This tool is used for adjusting the Y.P.V.S.
SDN1340