Description of Units and Circuit Boards
8 - 64
8.9 Installation of safety plug
NOTICE
Observe DIN EN ISO 10218-2 with respect to the safety measures.
If the SERVO power is ON when the interlock signal is input, the SERVO power turns OFF.
As long as the interlock signal is active, the SERVO power cannot be turned ON.
However, the servo power does not turn OFF when the door is opened only during the
TEACH mode.
In this case, the SERVO power can be turned ON while the interlock signal is input.
Installation of Saftey Plug
Robot working area
Safety casing
Service door
Emergency shut-off
Plug
Safety plug
1
1
2
3
4
5
6
4
2
3
4
5
6
To Next Page
Loading...
