General
1 - 7
1.3 Target group
This manual is directed at users with the following knowledge:
• Advanced knowledge of mechanical engineering
• Advanced knowledge of electrical engineering
• System knowledge of the robot control
• Specially trained staff
NOTICE
According to the international DIN EN ISO 10218-1 standard, operators of a robot system
must receive training before they operate the robot.
For optimal use of our products, we recommend our customers to take part in a training
session at the YASKAWA Academy. For more detailed information on the training
programme, please visit www.yaskawa.eu.com or directly get in touch with your YASKAWA
branch office.
1.4 Intended use
Typical applications:
• Flange-mounting tools
• Installation of spot welding guns
• Installation of arc welding equipment
• Installation of grippers
• Machining and transporting workpieces or products
To Next Page
Loading...
