YASKAWA DX200 - 1 Introduction; What Is the Job Editordx200; Features

1INTRODUCTION
15
HW1482392
1 INTRODUCTION
1.1 What Is the Job EditorDX200?
The Job EditorDX200 is editing software for INFORM Ⅲ , the control language of the robot
controller, the DX200.
1.1.1 Features
On a personal computer, Job EditorDX200 can be used in the same manner as a
programming pendant to edit jobs. The displays where editing can be done are the same as
those for the programming pendant. Anyone who can edit with the programming pendant can
easily use this software.
Since the parameter file used in Job EditorDX200 are the same used in the
programming pendant, required instructions and additional items (such as tags,
numeric data) may not be displayed properly unless presetting each parameter
options.
NOTE