YASKAWA DX200 - Copying an Instruction; Copying One Line; Copying Multiple Lines

3EDITING(Standard)
43
HW1482392
3.5 Copying an Instruction
3.5.1 Copying One Line
Perform the same operation as described in section 3.6 "Pasting an Instruction".
3.5.2 Copying Multiple Lines
Perform the procedure described in section 3.4 "Selecting Multiple Lines" and then perform
the procedures as described in step “2” in section 3.5.1 "Copying an Instruction".
There is no limitation to the number of instructions that can be copied. Move
instructions can also be copied, however, pay attention in operating those copied
instructions.
②
Click
[
Co
py]
.
① Move to the line
to be copied.
NOTE