YASKAWA DX200 - Searching; Searching for Character Strings; Moving the Line Number or Step Number

3EDITING(Standard)
60
3.11 Searching
3.11.1 Searching for Character Strings
The [Find and Jump] dialog box appears.
The search for the character string starts.
3.11.2 Moving the Line Number or Step Number
To call up the [Find and Jump] dialog box, perform the same procedure as described in steps
“1” to “3” of section 3.11.1 "Searching for Character Strings".
The search for the line No. or Step No. starts.
The search starts from the cursor's position and goes down the list.
The search starts from the cursor's position and goes down the list.
① Click [Find].
② Enter the character
string to be found
(disregarding
whether upper-case
or lower-case
characters are used).
③
Click [Next].
NOTE
① Select a line No. or
Step No.
② Click here to select
the No.
③
Click [Jump].
NOTE