YASKAWA DX200 - Copying an Instruction; Copying One Line; Copying Multiple Lines

4EDITING (TEXT)
85
HW1482392
4.5 Copying an Instruction
4.5.1 Copying One Line
Perform the same operation as described in section 4.6 "Pasting an Instruction".
4.5.2 Copying Multiple Lines
Perform the procedure described in section 4.4 “Selecting Multiple Lines” and then perform
the procedures as described in step 3 in section 4.5.1 “Copying an Instruction”.
It does not limit to copy instructions, but please caution if copy the move instruction
or structured language.
① Move the cursor to
the top of line to be
copied.
② Move the cursor
holding the [Shift] key
down to select the line.
③ Click [Copy].
NOTE