YASKAWA DX200 - Deleting an Instruction; Deleting One Line; Deleting Multiple Lines

3EDITING(Standard)
41
HW1482392
3.3 Deleting an Instruction
3.3.1 Deleting One Line
The dialog box appears asking if you are sure you want to delete the line.
3.3.2 Deleting Multiple Lines
Perform the same operation as described in section 3.3.1 "Deleting One Line" after selecting
multiple lines described in the next section.
Since the cut contents are copied to the buffer, they can be pasted on another
place or job.
① Select the address
or instruction to
b
e deleted.
② Click [Cut].
③ Click [Yes].
NOTE