YASKAWA DX200 - Hardware Lock Key

1INTRODUCTION
17
HW1482392
1.3 Hardware Lock Key
For proper operation, connect provided hardware lock key (USB type) to personal computer
before using this software.
Check and execute <Check the computing environment> <Installation of driver>
before
connecting the key to USB port
.
<Check the computing environment>
Multi-connection of USB type key is not available for one USB port because of hardware
structure. Therefore, only one key should be connected to one USB port. When installing
multiple offline software into one personal computer and multi-connectiong USB keys, use the
personal computer which is provided same numbers of USB ports as the number of software
to be installed.
<Installation of driver>
Execute “\SentinelDriver\Sentinel System Driver Installer 7.5.9.exe” of installation CD-ROM.
Refer to “\SentinelDriver\Manual\Sentinel System Driver ReadMe.pdf” for the details of
installation.
Refer to section 6.1 "Frequently-asked questions" for other countermeasures concerning
hardware lock key.
Please install the driver after detaching the all sentinel hardware key from the
personal computer.
• Be sure to install the driver.
• When installing the driver, be sure to login in administrator mode in order to add
files to system folder and input information in registry.
• If a key is connected to personal computer before installing the driver,the
message concerning the driver is displayed. In this case, and detach the key
from personal computer and then install the driver.
If a key is connected to personal computer before installing the driver under
Windows 95/98/NT4.0/2000/XP environment, Windows wizard ([Add New
Hardware] Wizard) starts up. In this case, push [cancel], and detach the key from
personal computer and then install the driver.
• When installing the driver under Windows NT4.0 environment, please install the
driver located in the folder “\SentinelDriver\SSD5411\SSD5411-32bit.EXE” of
installation CD-ROM.
For the driver installation procedure, please consult the installation manuarl
“\SentinelDriver\SSD5411\Manual\us\Readme.pdf”.
NOTE
NOTE