YASKAWA DX200 - Using an Alias

3EDITING(Standard)
58
3.10.4 Using an Alias
To call up the Detail Edit window, perform the same procedure as described in steps “1” to “3”
of section 3.10.1 "Changing an Item".
A selection list appears.
A confirmation dialog box appears after selecting an item available for alias.
① Use [↓], [↑], [→] or
[←] key to move the
cursor to the item to be
deleted.
② Press the [Space] key.
③ Use the [↓] or [↑]
key to make a
selection.
④ Press the [Enter] key.
⑤ Click on [OK] button.