YASKAWA DX200 - Deleting an Instruction; Deleting One Line; Deleting Multiple Lines

4EDITING (TEXT)
83
HW1482392
4.3 Deleting an Instruction
4.3.1 Deleting One Line
Select the line to be deleted.
4.3.2 Deleting Multiple Lines
Perform the same operation as described in section 4.3.1 "Deleting One Line" after selecting
multiple lines described in the next section.
Since the cut contents are copied to the buffer, they can be pasted on another
place or job.
① Move the cursor to the
top of line to be deleted.
② Move the cursor holding
the [Shift] key down to
select the line.
③ Click [Cut].
NOTE