YASKAWA DX200 - Adding an Item

3EDITING(Standard)
55
HW1482392
3.10.2 Adding an Item
To call up the Detail Edit window, perform the same procedure as described in steps “1” to “3”
of section 3.10.1 "Changing an Item".
A selection list appears.
The added item appears in the [Detail Edit] window.
① Use the [↓], [↑], [→]
or [←] key to move the
cursor to the item to be
changed.
② Press the [Space]
key.
③ Use the [↓] or [↑]
key to make a
selection.
④ Press the
[Enter] key.
⑤ Move the cursor to the
numerical data when
the numerical value of
the item is to be
changed.
⑥ Press the [Space]
key.