YASKAWA DX200 - Using a Macro Command

3 EDITING(Standard)
79
HW1482392
3.21 Using a Macro Command
By storing the macro definition file (MACRO.DAT) in the same folder as the parameter file
(All.prm), the defined macro command can be used.
The [Select Inst] dialog box for each group of instructions appears.
The [Select Inst] dialog box appears.
Instructions that have been defined in the macro definition file appear. These instructions are
used to add or edit the macro command.
The Job Editor DX200 can use a macro command but cannot create the
command. To use this function, use the parameter file of which option for
"INFORM creation function" is available.
① Move the cursor to
the address area of the
line to be added.
② Press the [Space] key,
or click the Menu.
(Menu: [Home] tab -
[Edit] - [Modify
③Move the cursor to
"MACRO" and select
it by clicking it.
NOTE