YASKAWA DX200 - Changing Numeral Values (2)

3EDITING(Standard)
47
HW1482392
3.7.2 Changing Numeral Values (2)
The line-edit box appears in the lower-left of the window.
The [Value Input] dialog box appears.
① Move to the
instruction line
to be edited.
② Press the [Space] key, or
click the Menu.
(Menu: [Home] tab - [Edit]
- [Modify Instruction])
③ Press the [→] key.
④ Press the [Space] key.
⑦ Press the [Enter] key
or click [OK].
⑦ To cancel the changes,
press the [Esc] key or
click [Cancel].
⑤ Change the value by
one of the following
three methods.
1)Enter the value directly.
3) Click here.
2) Press the [↑] or [↓] key.
⑥ Click [OK].