YASKAWA DX200 - Selecting a Job; Opening One Job

2BASIC OPERATION
22
2.4 Selecting a Job
Various basic parameter files and jobs are provided in Sample under the installation folder.
Refer to those samples before reading the following procedures.
2.4.1 Opening One Job
The [Open] dialog box appears.
The DX200 parameter file (ALL.PRM) must be in the directory having the job. If
there is no parameter file, the following warning appears.
②
Click
[
Select Job
]
.
① Click [ ] button.
③ Click the file to be
opened.
④ Click [Open].
NOTE