YASKAWA DX200 - Defining Position Variables

5EDITING OTHER ITEMS
97
HW1482392
5.2 Defining Position Variables
The [Position Variable] dialog box appears.
To create a job using position variables, the position variables must be defined in
this window before saving the data.
① Click [Settomgs].
② Click [Position Variable].
③ Click [Robot].
④ Click type to select the frame.
⑤ Click and Edit the value.
⑥ Click [OK].
*) Use [↓], [↑], [→] or[←] key to move the
cursor and press [Space] key or [F2] key.
*) Use [↓], [↑], [→] or[←] key to move the
cursor and press [Space] key or [F2] key.
NOTE