YASKAWA DX200 - Adding an Instruction

3EDITING(Standard)
39
HW1482392
3.2 Adding an Instruction
Press the cursor keys to highlight the address of the line where an instruction is to be added.
This can be also done by clicking the mouse directly.
The [Select Inst] dialog box for each group of instructions appears.
The [Select Inst] dialog box appears.
① Move to the address of the line
where an instruction is to be
inserted.
② Press the [Space] key, or click the
menu.
(Menu: [Home] tab - [Edit] -
[Insert
Instruction
])
③ Select a line by pressing
the cursor keys or by
clicking the mouse.
④ Press the [Enter] key or
double-click the mouse.
*) Press the [Esc] key to exit
the Add mode.
⑤ Select a line by pressing
the cursor keys or by
clicking the mouse.
*) Press the [Esc] key to
return to the [Select Inst]
dialog box for each group
of instructions.
⑥ Press the [Enter] key or
double-click the mouse.