YASKAWA DX200 - Editing in the Detail Edit Window; Changing an Item

3EDITING(Standard)
53
HW1482392
3.10 Editing in the Detail Edit Window
3.10.1 Changing an Item
The line-edit box appears in the lower-left of the window.
The [Detail Edit] window appears.
A selection list appears.
① Move to the
instruction line
to be edited.
② Press the [Space] key, or
click the Menu.
(Menu: [Home] tab - [Edit] -
[Modify Instruction])
③ Press the [Space]
key.
④ Use the [↓], [↑], [→]
or [←] key to move the
cursor to the item to be
changed.
⑤ Press the [Space] key.
⑥ Use the [↑] or [↓]
key to select an item.
⑦ Press the [Enter]
key.
*) To cancel, press the
[Esc] key.