YASKAWA DX200 - Editing an Expression

3 EDITING(Standard)
75
HW1482392
3.20 Editing an Expression
To edit an expression, use a "SET" instruction.
The [Select Inst] dialog box for each group of instructions appears.
The [Select Inst] dialog box appears.
To edit an expression, set the language level to “Standard” or “Extension”.
NOTE
① Move to the
address area of the line
to be inserted.
② Press the [Space] key,
or click the Menu.
(Menu: [Home] tab -
[Edit] - [Modify
Instruction])
*) Press the [Esc] key to
exit the Add mode.
③ Select a line by
pressing the cursor
keys or clicking the
mouse.
④ Press the [Enter]
key or
double-click the
mouse.
*) Click here or press the
[Esc] key to return to the
[Select Inst] dialog box for
each group of instructions.
⑤ Select a line by
pressing the cursor
keys or clicking the
mouse.
⑥ Press the [Enter]
key or
double-click the
mouse.