YASKAWA MP2300Siec - 1 Introduction; Mp23 Iec Features

1.1
MP23iec Features
3
1 Introduction
1.1 MP23iec Features
MP2300Siec and MP2310iec are small all-in-one machine controllers.
They are characterized by the following standard features:
 Deterministic motion network MECHATROLINK-II
• Controls up to 16 axes of servos or inverters supporting
MECHATROLINK-II.
• Connects up to 21 total stations including remote I/O.
• Can include 6 virtual axes.
 Ethernet (100Mbps)
• EtherNet/IP
• Modbus TCP
• Allows high-speed communications with MotionWorks IEC
• Enables communication with the application program by using a touch
panel
• Enables communication with the application program from another
controller