YASKAWA SGDV User Manual

7.14 Software Version Display (Fn012)
7-23
7
Utility Functions (Fn)
7.14 Software Version Display (Fn012)
Select Fn012 to check the SERVOPACK and encoder software version numbers.
Follow the steps below.
7
Press the DATA/SHIFT Key for approximately one second.
"Fn011" is displayed again.
Step
Display after
Operation
Keys Operation
MODE / SET DATA /
Step
Display after
Operation
Keys Operation
1
Press the MODE/SET Key to select the utility function
mode.
2 Press the UP or DOWN Key to select Fn012.
3
Press the DATA/SHIFT Key for approximately one second
to display the SERVOPACK software version number.
4
Press the MODE/SET Key to display the encoder software
version number.
5
Press the DATA/SHIFT Key for approximately one second.
"Fn012" is displayed again.
MODE / SET DATA /
MODE
/
SET DATA
/
MODE
/
SET DATA
/
MODE
/
SET DATA
/
MODE / SET DATA /

YASKAWA SGDV Specifications

General

Protection Class	IP20
Communication Protocols	MECHATROLINK-III, EtherCAT
Feedback	Incremental encoder, Absolute encoder
Type	Servo Drive
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Encoder error
Ambient Temperature	0°C to 55°C
Storage Temperature	-20°C
Vibration Resistance	5.9 m/s² (0.6G)