7 Utility Functions (Fn)
7-28
7.18 Display of Servomotor ID in Feedback Option Module (Fn01F)
This function displays ID information for servomotor and encoder in feedback option module connected to the
SERVOPACK.
To use this function, the digital operator (JUSP-OP05A-1-E, option) or SigmaWin+ (option) is needed.
This function cannot be executed from the panel operator on the SERVOPACK.
The following items can be displayed.
ID Items to be Displayed
Servomotor
• Servomotor model
• Servomotor order number
• Servomotor input voltage (V)
• Servomotor capacity (W)
• Servomotor rated current (Arms)
Encoder
• Encoder model
• Encoder serial number
• Encoder type/resolution (Two types of resolution display available: Num-
ber of bits and pulses/rev.)
Parameter file
• Parameter file source ID (14 characters)
• Parameter file version (4 digits hexadecimal display)
To Next Page
Loading...
