Machine Protection
6-51
îš„Constants and Output Signals
Set the corresponding setting in the multi-function output (H2-01 to H2-05) to output the desired Fref/Fout
Agree signal, Fref/Set Agree signal, or Frequency Detection signal.
L4-03
Speed agree
detection level
(+/−)
Set the speed that you want to
detect in Hz.
Set positive values for forward,
negative values for reverse.
−
400.0
to
+400.0
0.0 Hz No A A A A A 49BH
Spd Agree Lvl
+−
L4-04
Speed agree
detection width
(+/−)
Set the speed detection range in
Hz.
0.0 to
20.0
2.0 Hz No A A A A A 49CH
Spd Agree
Width +−
User Constant Number Name Function
L4-01 Speed agree detection level
Fref/Set Agree 1
Frequency Detection 1
Frequency Detection 2
Frequency Detection 5
L4-02 Speed agree detection width
Fref/Fout Agree 1
Fref/Set Agree 1
Frequency Detection 1
Frequency Detection 2
Frequency Detection 5
L4-03 Speed agree detection level (+/-)
Fref/Set Agree 2
Frequency Detection 3
Frequency Detection 4
L4-04 Speed agree detection width (+/-)
Fref/Fout Agree 2
Fref/Set Agree 2
Frequency Detection 3
Frequency Detection 4
Function Setting
Fref/Fout Agree 1 2
Fref/Set Agree 1 3
Frequency Detection 1 4
Frequency Detection 2 5
Fref/Fout Agree 2 13
Fref/Set Agree 2 14
Frequency Detection 3 15
Frequency Detection 4 16
Frequency Detection 5 36
Con-
stant
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
MEMO
BUS
Regis-
ter
Display
V/f
V/f
with
PG
Open
Loop
Vector
1
Flux
Vec-
tor
Open
Loop
Vector
2
To Next Page
Loading...
Need help?
General