To Next Page

To Previous Page

Specifications of Options and Peripheral Devices

9-9

* 1. Under development.

* 2. Applicable for G7-Series Inverters with software versions PRG: S1038 or later

Built-in

(con-

nected

to con-

nector)

Com-

muni-

cations

Option

Boards

DeviceNet

Communica-

tions Inter-

face Board

SI-N

73600-

C021X

Used to communicate with an Inverter from a host computer

using DeviceNet communications to start/stop Inverter opera-

tion, read/set parameters, and read/set monitor constants (out-

put frequencies, output currents, etc.).

ProfiBus-DP

Communica-

tions Inter-

face Board

SI-P

73600-

C022X

Used to communicate with an Inverter from a host computer

using ProfiBus-DP communications to start/stop Inverter

operation, read/set parameters, and read/set monitor constants

(output frequencies, output currents, etc.).

ProfiBus-DP

Communica-

tions Inter-

face Board

SI-P1

73600-

C033X

InterBus-S

Communica-

tions Inter-

face Board

SI-R

Used to communicate with an Inverter from a host computer

using InterBus-S communications to start/stop Inverter opera-

tion, read/set parameters, and read/set monitor constants (out-

put frequencies, output currents, etc.).

CANopen

Communica-

tions Inter-

face Board

SI-S1

Used to communicate with an Inverter from a host computer

using CANopen communications to start/stop Inverter opera-

tion, read/set parameters, and read/set monitor constants (out-

put frequencies, output currents, etc.).

ControlNet

Communica-

tions Inter-

face Board

SI-U

Used to communicate with an Inverter from a host computer

using ControlNet communications to start/stop Inverter opera-

tion, read/set parameters, and read/set monitor constants (out-

put frequencies, output currents, etc.).

CC-Link

Communica-

tions Inter-

face Board

SI-C

73600-

C032X

Used to communicate with an Inverter from a host computer

using CC-Link communications to start/stop Inverter opera-

tion, read/set parameters, and read/set monitor constants (out-

put frequencies, output currents, etc.).

ONWORKS

Communica-

tions Inter-

face Board

SI-J

73600-

C035X

Used to communicate with an Inverter from a host computer

using L

ONWORKS communications to start/stop Inverter

operation, read/set parameters, and read/set monitor constants

(output frequencies, output currents, etc.).

ONWORKS

Communica-

tions Inter-

face Board

SI-W1

73600-

C034X

Used to communicate with an Inverter from a host computer

using L

ONWORKS communications to start/stop Inverter

operation, read/set parameters, and read/set monitor constants

(output frequencies, output currents, etc.).

With Display Data Channel (DDC) function.

MECHA-

TROLINK-

Communi-

cations Inter-

face Board

SI-T

100-017-994

Used to communicate with an Inverter from a host computer

using MECHATROLINK communications to start/stop

Inverter operation, read/set parameters, and read/set monitor

constants (output frequencies, output currents, etc.).

Table 9.5 Option Boards (Continued)

Type Name

Code Num-

ber

Function

Document

Number

Brand	YASKAWA
Model	Varispeed G7
Category	Inverter
Language	English

YASKAWA Varispeed G7 User Manual

Table of Contents

Other manuals for YASKAWA Varispeed G7

Questions and Answers:

YASKAWA Varispeed G7 Specifications

Related product manuals