Basic Phone Features
149
3. Tap the desired forwarding type.
Always Forward: Forwards all incoming calls.
Busy Forward: Forwards incoming calls when you’re in a call.
No Answer Forward: Forwards all unanswered incoming calls.
4. Turn on the desired forwarding type.
5. Enter the number you want to forward to in the Forward To field.
6. If you select No Answer Forward, tap the After Ring Time field to select a desired ring
time to wait before forwarding.
7. Tap to accept the change or to cancel.
The icon on the status bar indicates that the call forward is enabled.
If the forward on code or off code is configured, the IP phone sends the corresponding code to
the server when a certain action takes place. For example, if you set the Always Forward on code
to be *71 (may vary on different servers), and the target number to be 1234. When you enable
Always Forward on the IP phone, the IP phone sends *711234 to the server, and then the server
will enable Always Forward feature on the server side, hence being able to get the right status of
the extension.
Call forward is configurable via web user interface at the path Features->Forward & DND.
Note
You can also enter the SIP URI or IP address in the Forward To field. For more information on
using the SIP URI or IP address, refer to Placing Calls on page 140.
To Next Page
Loading...
