Connecting Bluetooth Devices and PC
229
Pairing and Connecting the Bluetooth-Enabled Mobile Phone
You can pair up to countless mobile phones with your IP phone; however, only one mobile
phone can be connected at a time. After connection, the IP phone will automatically find an
available line key and assign the line key for Mobile Account. The Mobile Account key’s default
label is “My Mobile”. If there is no available line key, you may assign it manually.
Before you pair a mobile phone, check the Bluetooth mode on the mobile phone to make sure
that the mobile phone is discoverable.
To pair and connect the Bluetooth-Enabled Mobile Phone with your IP phone:
1. Activate the Bluetooth mode.
If there is no mobile phone found on the touch screen, tap to search for the mobile
phone.
2. Tap the desired mobile phone in the Bluetooth devices list to connect the mobile phone to
your IP phone.
3. Tap Pair on both mobile phone and IP phone.
Once the connection has completed successfully, the prompt “Connected” appears under
the mobile phone name.
To Next Page
Loading...
