Yealink CP960 - Silent Mode

User Guide for CP960 IP Phone
82
5. Tap to accept the change or to cancel.
Note
Notification Sound
To select a notification sound for the phone via phone user interface:
1. Tap Settings from the Home screen.
2. Tap Sound from the Basic block.
3. Tap the Notification Sound field.
4. Tap the desired notification sound in the pop-up dialog box.
5. (Optional.) Tap one of the Volume touch key to increase or decrease the notification
sound.
6. Tap OK to accept the change or Cancel to cancel.
Note
Silent Mode
If you turn on the silent mode, the IP phone won't produce ring tone/key tone/touch
sound/notification sound from phone's speaker.
To enable the silent mode via phone user interface, do one of the following:
- Tap Settings from the Home screen.
Tap Sound from the Basic block.
Touch sound is configurable via phone user interface only.
Notification sound is configurable via phone user interface only.