Yealink CP960 User Manual

User Guide for CP960 IP Phone
234
4. Tap to accept the change or to cancel.
You should make your IP phone discoverable first, and then the pre-configured Bluetooth
device name will display in scanning list of other device.
Disconnecting the Bluetooth Device
To disconnect your Bluetooth device from your IP phone:
1. Do one of the following:
- Tap .
- Swipe down from the top of the screen to enter the control center.
Long tap Bluetooth.
- Tap Settings from the Home screen.
Tap Bluetooth from the Basic block.
2. Tap the connected mobile phone.
3. Tap OK to accept the change or Cancel to cancel.
The mobile phone is disconnected. To connect it to your IP phone again, tap the mobile phone
again.
Unpairing the Mobile Phone
You can unpair your mobile phone with your IP phone. When you unpair the mobile phone, the
mobile phone information disappears from the PAIRED DEVICES list. To connect the mobile
phone to your IP phone again, tap the desired mobile phone in the AVAILABLE DEVICES list.

Yealink CP960 Specifications

General

Control type	Touch
Display type	LCD
Product type	IP conference phone
Voice codecs	CNG, G.722, G.722.1C, G.723, G.726, OPUS, VAD, iLBC
Product color	Stainless steel
Frequency range	2400 - 5000 Hz
Display diagonal	5 \
Display resolution	720 x 1280 pixels
Phonebook capacity	1000 entries
Ethernet interface type	Fast Ethernet
Microphone direction type	Omnidirectional
Supports expansion microphones	Yes
USB connector type	Micro-USB B
RJ-11 ports quantity	1
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	338 mm
Height	74 mm
Package depth	392 mm
Package width	405 mm
Package height	141 mm