Yealink CP960 - User Interfaces

User Guide for CP960 IP Phone
20
Icon indicator (associated with contact)
Icons
Description
The default local caller photo
The default mobile caller photo
LED Instructions
Mute key indicators LED on the CP960 IP phone:
LED Status
Description
Solid red
The phone is initializing.
The phone is muted.
Flashing red
The phone is ringing.
Solid green
The phone is placing a call.
There is an active call on the phone.
Off
The phone is powered off.
The phone is idle.
User Interfaces
Two ways to customize configurations of your CP960 IP phone:
 The user interface on the IP phone.
 The user interface in a web browser on your PC.
You can perform all call operation tasks and configure basic settings directly on the phone. In
addition, you can use the web user interface to access all configuration settings. In many cases,
it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, only one interface is available to operate the phone
and change settings.
Phone User Interface
You can customize your phone by tapping Settings from the Home screen. The Advanced
option is only accessible to the administrator, and the default administrator password is “admin”
(case-sensitive). For more information on customizing your phone with the available options via
phone user interface, refer to Customizing Your Phone on page 59.