Yealink CP960 - Power Saving

User Guide for CP960 IP Phone
62
The following shows the touch screen displays in different screen saver types:
To configure the screen saver via phone user interface:
1. Tap Settings from the Home screen.
2. Tap Display from the Basic block.
3. Tap Screen Saver.
4. Tap the Screen Saver Wait Time field.
5. Tap the desired time in the pop-up dialog box.
6. Tap the radio box after desired screen saver type.
7. Tap to accept the change or to cancel.
Note
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
Screen saver is configurable via phone user interface only.