User Guide for CP960 IP Phone
174
3. Enter the phone number which is receiving an incoming call.
4. Tap DPickup again.
The call is answered on your phone.
You can also configure a line key as a direct pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by tapping the direct pickup key directly. For
more information, refer to Line Keys on page 105.
Group Call Pickup
To enable group call pickup and configure the group call pickup code on a global basis via
web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Group Call Pickup.
3. Enter the group call pickup code in the Group Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
To Next Page
Loading...
