Yealink CP960 - Semi-Attended Transfer

Basic Phone Features
161
- Tap . Search for the contact and tap the desired contact to complete the transfer.
- Tap , and then tap -> Remote Phone Book. Search for the contact
and tap the desired contact to complete the transfer. (Remote phone book should be
configured in advance, refer to Remote Phone Book on page 98 for more
information.)
- Tap , and then select the desired list. Tap the desired entry to complete the
transfer.
The call is then connected to the number to which you are transferring.
Semi-Attended Transfer
Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to Configuring Transfer Mode via DssKey on page 183.
To perform a semi-attended transfer:
1. Tap More->Transfer during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Tap Transfer.
Tap Send to dial out. (The call will automatically dial out in about 5 seconds if you do
not tap Send.)
- Tap . Search for the contact and tap the desired contact and tap the desired
contact to dial out.
- Tap , and then tap -> Remote Phone Book. Search for the contact
and tap the desired contact to dial out. (Remote phone book should be configured in
advance, refer to Remote Phone Book on page 98 for more information.)