Yealink CP960 - Page 178

User Guide for CP960 IP Phone
178
Anonymous call rejection automatically rejects incoming calls from callers who deliberately
block their identities and numbers from being displayed. Anonymous call rejection is
configurable on a per-line basis. You can also configure the phone to send anonymous call
rejection on/off code to the server to activate/deactivate anonymous call rejection on the server
side.
To configure anonymous call rejection via phone user interface:
1. Tap Settings from the Home screen.
2. Tap Anonymous from the Features block.
3. Tap the desired line.
4. Turn on Anonymous Rejection.
5. (Optional.) Turn on Send Rejection Code.
6. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field beneath the Send Rejection Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call rejection feature on the phone.
7. Tap to accept the change or to cancel.
Anonymous call rejection is configurable via web user interface at the path Account->Basic.