Yealink CP960 - Page 201

Advanced Phone Features
201
To configure paging list via phone user interface:
1. Tap the paging list key from the DSS key screen.
If the paging list key is not configured, you can also tap Settings from the Home screen.
Then tap Paging List from the Features block to configure the paging list.
2. Tap after the desired paging group.
3. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Address
field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4. Enter the paging group name in the Label field.
5. Enter the desired channel in the Channel field.
The valid channel ranges from 0 to 30.
6. Tap to accept the change or to cancel.
7. Repeat steps 2 to 7, you can add more paging groups.
Paging list is configurable via web user interface at the path Directory->Multicast IP.
To delete paging group via phone user interface:
1. Tap the paging list key from the DSS key screen.
2. Tap after the desired paging group.
The icon only appears after the configured paging group.