User Guide for CP960 IP Phone
48
5. Tap the desired value (IPv4, IPv6 or IPv4 & IPv6) in the pop-up dialog box.
6. Tap to accept the change or to cancel.
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
1. Tap Settings from the Home screen.
2. Enter the admin password (default password: admin) from the Advanced block.
3. Tap Network->WAN Port->IPv4.
4. Tap the Type field.
5. Tap Static IP in the pop-up dialog box.
6. Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and
Secondary DNS field respectively.
To Next Page
Loading...
