Yealink SIP-T43U Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
157
Sending Volume Configuration
You can configure the sending volume of currently engaged audio devices (handset, speakerphone or headset)
when the phone is in use.
The following table lists the parameters you can use to configure the sending volume.
Parameter
voice.handfree_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the speaker.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Values
Integer from -50 to 50
Default
0
Web UI
Features > Audio > Handfree Send Volume (-50~50)
Parameter
voice.handfree.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the speaker's volume level during a call.
Permitted
Values
0-The speakerphone volume at the end of a call persists between calls.
1 to 15-The speakerphone volume does not persist between calls, and resets to this specified level
each new call.
Default
0
Parameter
voice.handset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the handset.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Values
Integer from -50 to 50
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > Audio > Handset Send Volume (-50~50)
Parameter
voice.handset.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the handset's volume level during a call.
Permitted
Values
0-The handset volume at the end of a call persists between calls.
1 to 15-The handset volume does not persist between calls, and resets to this specified level each
new call.
Default
0
Supported
Devices
All phones except CP920
Parameter
voice.headset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the headset.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.

Yealink SIP-T43U Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Sustainability certificates	REACH, RoHS
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Power consumption (typical)	2.2 W
Bluetooth version	4.1
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity	2
Lines quantity	12 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Voice codecs	AGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included	1 pc(s)
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	3.7 \
Display resolution	360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	206.2 mm
Width	224.9 mm
Height	174.9 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm